Tables - Page 10

Please read: This table is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses.

This tables defines the maintenance requirements for marks, mark beacons and mark protection.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

In June 2014, LINZ moved the information from the Authoritative Streets and Places database (ASP) into Landonline and the ASP database is no longer maintained.

This table identifies other names for a street or place record by linking to the SUFI of the other name. This allows multiple associations if applicable. Only one record is stored for each name/other_name combination, i.e. there is no reverse entry for any two SUFI’s.

This table is part of the Authoritative Streets and Places (ASP) Database. For more information about the database including the data model see here.

Notes:

• The Alias field was added during the conversion and all records were initially set to N (No). This field will be set if relevant when editing existing records or adding new records. The values for other records will be set when time permits.

Please read: This table is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses.

A Reduction Run is a mathematical process of reducing raw observations to generate a set of reduced observations (in the case of GPS observations, this results in the generation of baselines). The Reduction Run entity contains information about the filtering and quality measures applied in relation to the reduction method used.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

Please read: This table is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses.

Associative entity that links sites and localities.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

Please read: This table is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses. For a simplified version of data contained within this table see our property ownership and boundary data.

This table stores one record for each ring in a polygonal (e.g. fee simple) parcel or for the line sequence of a lineal (e.g. centreline) parcel. A polygonal parcel may have multiple rings, some of which may be exterior (i.e. polygons) or interior (i.e. holes). If a ring is an inner ring, its parent (i.e. bounding exterior ring) is specified in pri_id_parent_ring; otherwise, this field is NULL. The Parcel Ring record may not actually be a ring in the case of a lineal (e.g. centreline) parcel. The actual sequence of lines that define the ring is contained in the Parcel Boundary table.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

Please read: This table is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses.

An Adjustment is a mathematical process of generating corrections to Reduced Observations and Coordinates to generate a consistent set of adjusted Coordinates and adjusted Reduced Observations. The adjusted Reduced Observations are able to be re-generated from the adjusted Coordinates and are therefore not retained. Inputs are, Reduced Observations, Observation Accuracy, Coordinates and constraints which are defined by Adjustment Method and Adjustment Coefficients. The primary outputs are adjusted Coordinates, Coordinate Accuracy (again in the form of a VCV matrix) and identification of suspect Reduced Observations.The Adjustment entity contains information about the network adjustment process including, the type of adjustment model used, constraints applied, source, etc.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

Please read: This table is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses.

A Datum is a complete system for enabling Coordinates to be assigned to Nodes. A datum is prescribed by the appropriate authority from which it derives its validity. All Coordinates will be in terms of a Datum. A Datum also provides a spatial standard for the alignment of Reduced Observations via a Datum Calibration. Most Reduced Observations are Datum dependent but there are specific Reduced Observation types which are Datum independent. The Datum entity contains information about the official geodetic Datum used in Land Information NZ databases and other important Datum’s used to spatially reference source data (e.g.. Reduced Observations) or output data or products (e.g.. Coordinates, Digital Cadastral Database, topographic maps, hydrographic charts, etc). The Datum entity includes objects which, strictly, are reference frames rather than datum’s but the distinction is a fine technical point which is of no great consequence. The Datum entity includes vertical reference surfaces such as leveling datum’s, various tidal surfaces including Mean Sea Level, the geoid, datum ellipsoids, etc. For a Datum to maintain accuracy over a significant area it must be geodetic. Examples of non-geodetic datum’s are the Old Cadastral Datums. These do not account for the curvature of the earth and therefore can only maintain accuracy over a limited part of the earth's surface.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

Please read: This table is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses. For a simplified version of data contained within this table see our property ownership and boundary data.

Instruments can be made up of one or more actions. Actions are used to perform the actual operations of titles transactions. This table contains all the valid action types.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

Please read: This table is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses.

Adjustment Coefficient is a set of control parameters used by an Adjustment Method in the Generate Coordinate/Adjustment process.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.

Please read: This table is part of the comprehensive Full Landonline Dataset and is designed for use only by data professionals who require the complex version of our property ownership and boundary data for advanced uses.

This table is used to override the default values for an adjustment run.

Please refer to the LDS Full Landonline Data Dictionary and Models for detailed metadata about this table.